Top Features:

All 4 pins (GNC, VCC, D-, D+) of a USB connector brought out to male header pins breakout
Can direct plug in breadboard
Two mounting holes
Compact Size: 2.1cm x 1.9cm
Adapter No need additional power supply
Easily Adaptable to use with Other Boards
Great for prototyping USB microcontroller circuits

This adapters allow you to quickly and easily mount a USB Type B Female connector onto a breadboard or prototype boards. This breakout board brings all 4 pins of its B Female socket out to prototyping work.
This board is also great for supplying 5V power to your breadboard. Also good for an un-regulated, non-limited 5V supply up to 100mA.
We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB Mini-B connector to your breadboard - here it is.

Each pin brought to the male header pins. There are some prototyping area with 0.1" (2.54mm) spacing, allowing easy addition of simple circuits. 

Standard 1x4 2.54mm Pin Socket
Mini Series
Number of pin:4 Pins
Gender of Connector: Female
Withstand Voltage: AC 500V(50Hz)/min
Contact Resistance: 30m Ohm
Insulation Resistance: 100M Ohm
Operating Temperature: -40 to 85 ºC
Durability: More than 5000 Times
Hole Pitch: Approx. 21mm and 16mm
Hole Inner Diameter: Approx. 2.5mm
Board Size (L x W): 21 x 19mm (FR4 Laminate 1oz Copper)
Weight: 5g
NOTE: Solder Mask is Transparent
Solder Mask Features:
•  very good insulating properties, high dielectric strength 
•  aromatic free 
•  high stability, the film remains transparent and flexible in time
•  resistant to humidity 
•  resistant to diluted acids and alkalines
•  UV-resistant
•  can be soldered through
•  temperature range : -70 °C to +100 °C
•  dielectric strength is approx. 110kV/mm


Write a review

Note: HTML is not translated!
    Bad           Good

USB Type B Female Breakout Board

  • Product Code: BreakoutBoard
  • Availability: In Stock
  • 2.99€

  • 3 or more 2.79€
  • 5 or more 2.49€

Tags: Breakout Board