Specifications:
 
Output Board
Ideal for testing outputs and using for status indication. 8 small LED's (3mm), with current limiting resistor, ready to operate with +5V input. 
Can be connected directly to output port of control board, training board etc. 
 
This module intended for educational, experimental and production purposes with 8 led's
Power Supply Voltage: 3.3-12V
Peak Led Output Current (maximum): 20mA for each led
Peak Total Output Current (maximum): 160mA for 8 led's
 
Connects Directly to Others Controller Boards
Easily Test Outputs with LED Status Indication of each Port Pin
Separate Power Supply is Not Required
Easily Adaptable to use with Other Boards
Standard 1x10 2.54mm Pin Socket
Protection against reverse polarity (two diodes)
Operating Temperature: -40 to 85 ºC
Interface: 8 leds output
Hole Pitch: Approx. 40mm and 35mm
Hole Inner Diameter: Approx. 2.5mm
Board Size (L x W): 40 x 15mm
Weight: 4g
 

Write a review

Note: HTML is not translated!
    Bad           Good

Rapid Prototyping LED Module (Double Bargraph - 4 green, 2 yellow and 2 red) (Size M)

  • Product Code: ModuleLED_M
  • Availability: In Stock
  • 4.99€


  • 3 or more 4.89€
  • 5 or more 4.79€

Tags: Module

000webhost logo